ZyXEL Communications VMG1312-B Series User Manual page 27

Table 3 Navigation Panel Summary (continued)
LINK
Wireless
Home
Networking
Routing
QoS
NAT
DNS
Interface
Group
VMG1312-B Series User's Guide
TAB FUNCTION
General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP Use this screen to configure multiple BSSs on the Device.
MAC Use this screen to block or allow wireless traffic from wireless devices
Authentication of certain SSIDs and MAC addresses to the Device.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
WDS Use this screen to set up Wireless Distribution System (WDS) links to
other access points.
Others Use this screen to configure advanced wireless settings.
Channel Use this screen to scan wireless LAN channel noises and view the
results.
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional Use this screen to configure IP alias and public static IP.
Subnet
STB Vendor ID Use this screen to have the Device automatically create static DHCP
entries for Set Top Box (STB) devices when they request IP
addresses.
5th Ethernet Use this screen to configure the Ethernet WAN port as a LAN port.
Port
Static Route Use this screen to view and set up static routes on the Device.
Policy Use this screen to configure policy routing on the Device.
Forwarding
General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use these screens to configure QoS policers.
Monitor Use this screen to view QoS packets statistics.
Port Forwarding Use this screen to make your local servers visible to the outside
world.
Applications Use this screen to configure servers behind the Device.
Port Triggering Use this screen to change your Device's port triggering settings.
DMZ Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Address Mapping Use this screen to change your Device's address mapping settings.
DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
Use this screen to map a port to a PVC or bridge group.
Chapter 2 The Web Configurator
27