ZyXEL Communications VMG1312-B Series User Manual page 143

Use this screen to change your Device's static DHCP settings. Click Network Setting > Home
Networking > Static DHCP to open the following screen.
Figure 52 Network Setting > Home Networking > Static DHCP
The following table describes the labels in this screen.
Table 31 Network Setting > Home Networking > Static DHCP
LABEL
Add new static
lease
#
Status
MAC Address
IP Address
Modify
If you click Add new static lease in the Static DHCP screen or the Edit icon next to a static DHCP
entry, the following screen displays.
Figure 53 Static DHCP: Add/Edit
The following table describes the labels in this screen.
Table 32 Static DHCP: Add/Edit
LABEL
Active
Group Name
VMG1312-B Series User's Guide
DESCRIPTION
Click this to add a new static DHCP entry.
This is the index number of the entry.
This field displays whether the client is connected to the Device.
The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no other
adapter has a similar address.
This field displays the IP address relative to the # field listed above.
Click the Edit icon to have the IP address field editable and change it.
Click the Delete icon to delete a static DHCP entry. A window displays asking you to
confirm that you want to delete the selected entry.
DESCRIPTION
Select this to activate the connection between the client and the Device.
Select the interface group name for which you want to configure static DHCP settings.
See Chapter 13 on page 203 for how to create a new interface group.
Chapter 8 Home Networking
143