Advertisement
Mounting Instructions
Clean outside of window where antenna is to be mounted. Window should be free from moisture, dirt and
oil. Peel adhesive backing from antenna mast and place antenna carefully against surface of window.
The provided mast clip should be snapped onto the mast. Peel adhesive backing from antenna mast clip
and attach to the window.
Clean inside of window. Window should be free from moisture, dirt and oil. Peel adhesive backing from
pickup directly over base of antenna mast. Attach cable to pickup and to the television antenna input.
Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the TV
transmitter, nearby surroundings and weather may adversely effect TV reception. Results of these conditions
may be picture roll, poor reception (snowy picture), and momentary loss of color (especially while the
vehicle is moving).
For best viewing results, this antenna system is recommended to be used while the vehicle is stationary.
© 1999 Audiovox Corporation, Hauppauge, NY 11788
MOUNT AN-200
HORIZONTALLY ON
NON-TINTED WINDOW
ANTENNA MAST CLIP
PEEL ADHESIVE BACK
AND APPLY TO WINDOW
128-5563
Advertisement
