12. Set the console assembly on the Left and Right
Handrails (76, 77). Be careful not to pinch any
wires. Insert the excess Upright Wire (81) into
the Left Handrail.
Attach the console assembly to the Crossbar
(102) with six #8 x 3/4" Screws (1). Start all six
Screws, and then tighten them.
Attach the two Console Clamps (97) to the con-
sole assembly with four #8 x 1" Screws (9).
13. Hold the Left Upright Cover (74) against the
console assembly. Align the holes in the Left
Upright Cover with the holes in the Left Upright
(79). Attach the Left Upright Cover with two #8 x
3/4" Screws (1).
Attach the Right Upright Cover (75) to the Right
Upright (80) in the same way.
14. Press the Left and Right Tray Inserts (90, 91)
into the bottom of the Tray (92).
See steps 4 and 5. Tighten all six 3/8" x 4"
Screws (3).
12
Console Assembly
77
1
13
75
1
80
14
90
92
15
97
9
96
76
1
1
74
Console
1
Assembly
79
91
81