Mounting The Camera - Bosch NBC-265-W Installation And Operation Manual

20 en | Installation
3.3

Mounting the camera

The camera can be mounted either from the top or from the
bottom (1/4"-20 UNC thread). The mounting socket is isolated
from ground to prevent ground loops.
CAUTION!
Do not point the camera/lens into direct sunlight as this may
damage the sensors.
Figure 3.3 Mounting a camera
1.
2.
AR18-10-B012 | v1.54 | 2011.08
Use three screws to secure the base of the mounting unit
to a wood (Ø3.8 mm, 26 mm deep) or concrete (Ø6 mm,
26 mm deep) surface.
On the mounting unit, loosen the ball-socket adjustment
ring (2).
Installation and Operation Manual
120°
120°
3x Ø3.8 mm 3x Ø6 mm
D: 26 mm D: 26 mm
IP Camera 200 Series
27 mm
Bosch Security Systems