Ltc 8780 Series Data Converter Units; Ltc 8781 Series Data Converter Units; Ltc 8016/90 Bilinx™ Data Interface Unit; Ltc 8785 Series Code Converters - Bosch LTC 8600 Instruction Manual

20 | en

7.15 LTC 8780 Series Data Converter Units

7.16 LTC 8781 Series Data Converter Units

7.17 LTC 8016/90 Bilinx™ Data Interface Unit

7.18 LTC 8785 Series Code Converters

Bosch Security Systems, Inc.
The LTC 8780 Series are accessory units that convert the Allegiant system's biphase
control code into RS-232, or converts RS-232 back to biphase code. This provides
the capability of transmitting the control code over conventional RS-232 transmis-
sion mediums such as phone modems, fiber optics, microwaves, etc. The unit will
accept the biphase control code generated by an Allegiant main CPU bay, an
LTC 8568/00 Signal Distribution unit, or an output from an LTC 8569, an
LTC 8570, an LTC 8571, or an LTC 8572 Series Code Merger unit.
The LTC 8781 Series are accessory units that decode the Allegiant system's
encoded time/date information generated on the biphase control code line and con-
vert it into an RS-422 GPS format. This time/date information can be used to inter-
face into external time/date inserter products (such as the Kalatel KTS-53-16),
which are designed to be synchronized via a GPS signal.
The LTC 8016/90 Allegiant Bilinx Data Interface unit is an accessory used for com-
municating over-the-coax, with up to 16 Bilinx-capable AutoDome and/or Dinion™
Series cameras. The LTC 8016 provides complete control of pan/tilt/zoom, auxilia-
ries, and pre-position functions of Bilinx enabled AutoDome Series cameras. In
addition, complete programming of Dinion Series cameras and AutoDomes via their
on-screen menus is supported. Bilinx technology also supports camera-generated
event reporting to the Allegiant. This connection allows remote alarm inputs and
motion event data to be sent by the camera to the Allegiant without the need for
additional wiring between the camera site and the main control location. The LTC
8016 can also be used to transmit Bilinx communications over a number of video
transmission systems. Example devices include fiber optic links and external balun
devices that use CAT5 twisted pair cables for video communication.
The LTC 8785 Series code converter units are designed for use in older Allegiant
systems that have been upgraded to support 'variable speed' control code protocol.
The LTC 8785 units are used to provide a source of 'fixed speed' control code when
the system is generating the newer 'variable speed' control code preferred by the
AutoDome Series of PTZ cameras. The LTC 8785 would receive the variable speed
control code from the Allegiant via its LTC 8568/00 Signal Distribution unit and con-
vert it into the appropriate fixed speed control code. The 'fixed speed' control code
outputs from the LTC 8785 Series connect to the older TC8561 Series receiver/driv-
ers using the existing field cabling.
Instruction Manual
LTC 8600 | LTC 8800 Series
F.01U.127.393 | 2.0 | 2009.03