Using Your Refrigerator; Led Indicators And Control Panel - Beko nstallation & operating instructions and washing guidance Operating Instructions Manual

5

Using your refrigerator

4
LED indicators and control
panel
LED indicators in the front section of
your refrigerator are intended to help
you in monitoring the operation of your
appliance.
Keep your food in the refrigerator in a
safe manner by monitoring and using
these LEDs and controls as explained
below:
Fast Freeze Button (4): Used to freeze
the food quickly. Compressor may not
operate immediately but after some
time when the button is pressed and
this is quite normal.
Thermostat Setting Button (5): Used to
set your refrigerator between minimum
and maximum values.
Temperature Indicator (6): Displays the
inner temperature of your refrigerator.
Orange LED (1): Lights up when the
fast freeze button on the LED panel is
pressed. In this case, your refrigerator
operates continuously.
Press the button again when the food
you would like to fast freeze comes
to the desired temperature and the
orange LED will turn off.
5 6
26
1 2
Green LED (2): Lights up continuously
after plugging in your refrigerator.
Red LED (3): It warns
up continuously when there is not
enough cooling in the refrigerator,
when the door remains open for a
long time and when excessive food is
loaded.
If the red LED lights up continuously
when the conditions stated in the
adjacent column do not exist, then call
Service.
EN
3
user by lighting