Remote Access Commands - GE 23598 User Manual

To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security code.
The unit confirms your code with a double beep and plays the remote menu. IF the
wrong security code is entered the unit beeps three times and allows for correct
code to be entered.
NOTE: To bypass the greeting, you can enter your -digit security
code any time while the greeting is playing.
The unit waits for a remote command for 20 seconds after the correct security code
has been entered. Menu selections can be made while the menu is playing.
NOTE: The unit answers on the 10th ring when it is turned off or the
memory is full. To access the answerer, enter the -digit security
code after the beep. If memory is full, play messages and erase
some of them to restore memory.
NOTE: After the unit plays the remote menu, it waits 20 seconds for
a command, then disconnects.

Remote Access Commands

Play new message
Play all messages
Repeat messages (during message playback)
Play previous message (during message playback)
Skip to next message (during message playback)
Erase message (during message playback)
Stop playback (during message playback)
Turn answerer on/off
End call
1
2
5
6
7
0
4
3
4
2