Table of Contents
Advertisement
SETUP Operation
OK
RTN
F/SETUP
Changing Backlighting Colour
1
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select
ILLUMINATION. Press the OK button or MODE knob to
set.
3
Move the Flipper switch up or down and to select
GREEN or AMBER. Press the OK button or MODE
knob to set. The display returns to the SETUP screen.
NOTE
If you continue to press the Flipper switch to up or down, the
cursor position moves continuously.
4
When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTES
• You can also press the
Flipper switch to select an item.
• You can also press the
MODE knob to set an item.
• "Switching the Tuner Mode" in the SETUP items is described
in the Radio Operation on page 7.
• "Receiving RDS Regional (Local) Stations" and "PI SEEK
Setting" in the SETUP items are described in the RDS
Operation on page 9 and 10.
• "Receiving Announcement Information of DAB Local
Station", "Setting for Automatic Change from DAB to RDS"
and "Setting ON/OFF for DRC" in the SETUP items are
described in the DAB Operation on page 28.
The setting can be operated only when the optional DAB
receiver Box is connected.
• "Setting the Range of MP3 File Selection" in the SETUP
items is described in the Changer Operation on page 24.
The setting can be operated only when the optional changer
compatible with MP3 is connected.
• "Switching the incoming calls of the telephone" in the SETUP
items is described in the MobileHub
page 30.
The setting can be operated only when the optional portable
telephone and the Mobile Hub are connected.
18
-EN
MODE
Flipper switch
or
button instead of the
button instead of the OK button or
TM
Link Operation on
Sound (Beep) Guide Function
This function will give audible feedback with varying
tones depending upon the button pressed.
1
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select BEEP.
Press the OK button or MODE knob to set.
3
Move the Flipper switch up or down to select OFF or
set your preferred volume. The volume can be set one
of the three steps: LOW, MID, and HIGH. Press the OK
button or MODE knob to set. The display returns to the
SETUP screen.
NOTES
• The initial setting at the factory is BEEP OFF.
• When an external audio processor is connected, the beep tone
does not function although the BEEP setting is set to on.
• The beep tone will be output from the front speakers only.
4
When the setting is completed, press the F/SETUP
button to return to the normal mode.
Displaying Time
1
Press and hold the F/SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select CLOCK
DISPLAY. Press the OK button or MODE knob to set.
3
Move the Flipper switch up or down to change the
clock display ON or OFF. Press the OK button or
MODE knob to set. The display returns to the SETUP
screen.
4
When the setting is completed, press the F/SETUP
button to return to the normal mode.
Advertisement
Table of Contents
