Diamond Multimedia Viper V770 User Manual page 14

Note— Diamond Drivers must be installed the first-time you install a
Diamond product.
9. Click the button of the installation option you want. We recommend that
you use the default installation directories.
10. Click Next to continue installation.
Note— If you are prompted to keep or replace existing files, keep the newer
files.
11. After the installation is complete, click Next to restart your computer.
Congratulations, you have successfully installed your new Diamond graphics
accelerator!
Manual Installation of Diamond Drivers
If, for some reason, you need to install the drivers for your Diamond product
"manually," follow the procedures below for your operating system. If you
need to update your drivers, please see the chapter on Diamond Software
Tools later in this user guide.
Windows 98/95 Manual Driver Installation
To install the driver for your Diamond graphics accelerator, go to Start >
Settings > Control Panel > Display. The Display Properties page
appears. Continue with the following procedure:
1. Click the Settings tab, then click the Advanced button.
2. Click the Adapter tab, and then click the Change button. The Update
Device Wizard appears.
3. Click Next and choose Display a list of all the drivers ...
4. Click Next and then click Have Disk...
5. Insert the installation CD. If your system is set to "auto-play," the
Diamond installation program opens. Click Quit to exit the program.
6. From the Install From Disk dialog, type X:\Win9x\English\Drivers
(where "X" is the letter of your CD- or DVD-ROM drive). Click OK. The
.inf file for your Diamond product should appear in the Select Device
window.
7. Choose the driver that applies to your operating system and click OK.
8. Click OK again, and then click Next. The driver file(s) should be copied
to your system.
Note— If you are prompted to keep or replace existing files, keep the newer
files.
10