Software Installation - Diamond Multimedia Viper V770 User Manual

5. Insert your card firmly into the AGP slot. Care should be taken to press it
evenly and snugly into its slot. Do not force.
6. Once you are certain that the card is installed properly in its slot, secure it
to the computer frame with the screw you removed in step 2. Make sure
the card does not lift out of the AGP slot while tightening the bracket
screw.
7. Connect your VGA monitor cable to the 15-pin connector on your card.
8. Secure your computer cover and reboot your computer.
9. Continue with the software installation for your operating system in the
following sections.
S I
OFTWARE NSTALLATION
Now that you have installed your new Diamond graphics card and rebooted
your computer, complete your installation using the following directions.
Windows 98/95 and Windows NT 4.0
There are two ways to install the software for your Diamond graphics card:
8