Hardware Management; About The Iomega Storcenter Px12-450R Components; Front Panel; Drive Bay Detail - Iomega StorCenter px12-450r User Manual

Hardware Management

About the Iomega StorCenter px12-450r Components

This topic describes the front and rear panel components of the px12-450r.

Front Panel

Status Indicators, Buttons and Ports
1. Power button — Press and release to power the px12-450r on or off. When the px12-450r is
powered up, pressing the power button for less than 4 seconds will result in a graceful system
shutdown.
CAUTION! Holding the power button for 4 seconds will result in a forced shutdown and could cause
data loss if data transfers are in process.
2. Power / Status Indicator —

Solid blue — unit is powered on; no faults

Flashing blue — unit is initializing/booting or shutting down

Flashing amber — indicates a system failure: power supply, fan failure, or drive failure. Use
the device console to view details.
3. Drive bays — The Iomega StorCenter px12-450r has 12 user-serviceable drive bays. See Drive Bay
Detail below for additional information.
4. USB 2.0 connector — Supports devices such as USB storage devices and printers.

Drive Bay Detail

1. Drive Sled Release Latch — Press the release button and pull the latch to release the drive sled.
149