Organising Presets Received From A Device; Viewing The Contents Of A Memory; Saving A Setup; Loading A Setup - M-Audio Evolution MK425C User Manual

Organising Presets Received From A Device

You can name the memories as you like. To re-name a memory, double-click on the memory. You can then move memories around by dragging them to
a new position, or using the copy buttons between the two windows.
These buttons are defined below:
Will copy the selected memory in Bank 2 to Bank 1.
Will copy the selected memory in Bank 1 to Bank 2.
Will copy all memories in Bank 2 to Bank 1.
Will copy all the memories in Bank 1 to Bank 2.
Will undo the last copy you made. Only the last copy is remembered.
It's a good idea to decide which column is your master column, to avoid confusion and maybe loosing hours of work.

Viewing The Contents Of A Memory

Right-click on a memory to view the contents. Please note that it is not possible to edit the contents of a memory. The Sys Ex librarian will simply allow
you to rearrange the order of memories, or copy memories between one dump and another. The screen shot shown below shows the first memory of
a memory dump from a 425C with the factory defaults.

Saving A Setup

Once you have named all your presets, and organised them in the desired order, click 'save' to save the content.
Alternatively you can click on the File menu and select save to save the file with the previously assigned file name, or save as to assign the memory dump
a new file name.
The shortcut key to save is CTRL+S. Make sure you give the file a name which allows you to quickly identify your collection of setups.

Loading A Setup

To load a memory setup file back in to the librarian, click on the 'Load' button and select the required file. The loaded preset setups will appear in the
Edit Window. You can then either send it directly to the Evolution device by clicking send, or edit it.
Alternatively, select Open from the File menu.
The shortcut key for loading is CTRL+O.

Future Development Of The Librarian

We strongly recommend you register your ownership of the Evolution Librarian if you would like to be kept informed about future development. As you
can see from the version number, the software is at an early version 1.0 stage and we will continue to work on enhancements for the software.
To register your copy, please visit www.evolution.co.uk/register
Evolution MK-425C • MK-449C • MK-461C
11