Performing Voltage Measurements
Measuring AC voltage
1 Set the rotary switch to
and
mode, press
is shown on the display.
2 Connect the red and black test leads to
input terminals V. mV (red) and COM
(black) respectively.
3 Probe the test points and read the display.
4 Press
measurements. Parameter can be switched
consecutively.
Measuring DC voltage
For measuring DC voltage from a
NO TE
mixed signal in DC measurement
mode, ensure that the Filter is
enabled
1 Set the rotary switch to
Ensure that
2 Connect the red and black test leads to
input terminals V. mV (red) and COM
(black) respectively.
3 Probe the test points and read the display.
4 Press
measurements. Parameter can be switched
consecutively.
. For
to display dual
is shown on the display.
to display dual
U1253B Quick Start Guide
to ensure
or
.