ProForm 300 Spx Bike Manual page 6

2. If there is a shipping bracket (not shown) on the
front of the Frame (1), remove the two screws,
the two washers, and the shipping bracket.
Discard the screws, washers, and shipping
bracket.
Orient the Front Stabilizer (8) so that the Wheels
(21) are in the position shown.
Attach the Front Stabilizer (8) to the Frame (1)
with two M8 x 90mm Carriage Bolts (34), two M8
Washers (33), and two M8 Acorn Nuts (53).
3. Identify the Right Pedal (35).
Using an adjustable wrench, firmly tighten the
Right Pedal (35) clockwise into the Right Crank
Arm (31).
Then, tighten the Left Pedal (45) counterclock-
wise into the Left Crank Arm (12).
2
53
33
53
3
12
45
6
21
1
8
33
31
35
34