Epic A17u Bike User Manual page 8

6. Orient the Front Shield Cover (7) and the Upright
(4) as shown. Slide the Front Shield Cover onto
the Upright.
While a second person holds the Upright (4)
near the Frame (1), tie the lower end of the wire
tie in the Upright to the Main Wire (58). Then,
pull the upper end of the wire tie until the Main
Wire is routed through the Upright.
Tip: To prevent the Main Wire (58) from
falling into the Upright (4), secure the Main
Wire with the wire tie.
Tip: Avoid pinching the Main Wire (58). Slide
the Upright (4) onto the Frame (1). Attach the
Upright with five M10 x 25mm Screws (74).
Then, slide the Front Shield Cover (7) downward
and press it onto the Left and Right Shields
(10, 11).
7. Attach the Accessory Tray (46) to the Upright (4)
with four M4 x 15mm Screws (80).
6
Wire Tie
4
7
Wire Tie
74
1
58
7
4
80
80
8
Avoid pinching the
Main Wire (58)
74
10, 11
46