Epic A17r Bike User Manual page 10

10. Identify the Right Handlebar (6).
Attach the Right Handlebar (6) to the Console
Bracket (35) with three M8 x 13mm Screws (72);
start all three Screws, and then tighten them.
Attach the Left Handlebar (16) in the same
way.
11. While another person holds the Console (13)
near the Console Bracket (35), insert the console
wires into the hole in the center of the Console
Bracket.
Tip: Avoid pinching the wires. It may be
necessary to turn the Console Knob (27) and
adjust the angle of the Console Bracket (35).
Attach the Console (13) to the Console Bracket
(35) with four M4 x 12mm Screws (75).
10
16
11
13
Avoid pinching
the wires
10
35
6
72
75
35
27