Cascading Several Chargers - Sennheiser L 2015 Instructions For Use Manual

Cascading several chargers

Make sure that the charger is
disconnected
mains.
Unscrew the two screws
at the right bottom side of
the charger.
Slide the two rails
the guiding slots and screw
them tight using the two
screws
Unscrew the two screws
at the left bottom side of the
second charger.
Slide the second charger
onto the rails of the first
charger and screw the rails
tight using
screws
Up to three chargers can be
cascaded together with the
rails and can by powered by a common mains unit.
Numbers of chargers
1
up to 3
from
.
the
.
the
out of
two
Mains unit required
NT 1
NT 3
23