Location Of Controls And Features; Handset - IBM -3460 Installation And Operating Manual

LOCATION OF CONTROLS AND FEATURES

Handset

Delete Key
MENU
Hold/Menu Key
HOLD
DELETE
Talk Key
CID
1 2 ABC
4 GHI 5 JKL
PQRS TUV
7 8
Temporary Tone
Key OPER
TONE 0
Flash Key
FLASH CHAN
Channel Key
NEW
CALL
New Call LED
Ringer Switch
7
Antenna
Headset Jack
LCD Display
Up/Down Keys
VOLUME
Caller ID Key
3 DEF
6 MNO
Dial Pad
WXYZ
9
#
Redial/Pause Key
MEM REDIAL
Memory Key
Microphone
LOCATION OF CONTROLS AND FEATURES
Talk T
The T key is used to access the telephone line or end a call.
Delete Key D
The D key is used to erase digits on the display, single or multiple entries from the
speed dial and Caller ID directories.
Caller ID Key C
The C key is used to review Caller ID information stored in memory.
Hold Key H/MENU
The H/MENU key is used to place a call on hold. This key is also used to access
the programmable functions of your phone.
Up/Down Keys + -
The + - keys let you scroll through menu options and adjust the ringer and
handset volume.
Dial Pad
Numeric keys are used in the conventional manner for dialing.
Flash Key F
The F key is used to access telephone company services, like call waiting.
Redial Key R/PAUSE
R/PAUSE will automatically redial the last number dialed. It is also used to program
a measured pause into a dialing sequence stored into a memory location.
Memory Key M
Use M to program and retrieve the numbers in the speed dial directory.
Channel Change Key c
The c key, when pressed, will scan up to 50 channels and select the clearest one
to provide the best possible reception.
Temporary Tone Key *
If the base is set to pulse dialing, pressing * causes subsequent digits to be dialed
out using tone until the line is put back on hook.
Ringer Switch
The RINGER switch is used to turn the handset ringer ON and OFF.
Headset Jack
Allows using a headset for hands-free convenience.
8