Pan Detection; Control Lock; Performance Boost Function - Jenn-Air JIC4430XS Use And Care Manual

To Turn Off a Bridge:
1. Touch the Bridge keypad for the zone being used (left side
bridge or right side bridge).
The surface cooking areas will resume operation as 2
separate areas.
NOTE: Performance Boost cannot be used on the same
elements in combination when the Bridge function.

Pan Detection

If the system cannot recognize the pan, or if the pan has been
removed from the surface cooking area, the "replace pan"
animation appears in the cooking area display as a reminder. See
the following illustration.
If the pan is not placed within 30 seconds, the zone(s) will switch
Off.
If a Timer is running when a pan is removed, the countdown will
continue.

Control Lock

The Control Lock avoids unintended use of the surface cooking
areas.
If Control Lock is activated when power to the cooktop is off, the
cooktop is locked out, and the surface cooking areas cannot be
turned on by the cooktop touch controls.
If Control Lock is activated when power to the cooktop is on, all
keypads are locked out except for the Power and On/Off
keypads.
To Lock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds. After
3 seconds, a tone will sound and the indicator light above the
Control Lock keypad will light, indicating that the cooktop
controls are in the lockout position.
If the cooktop is in use when Control Lock is activated, cooking
will proceed as normal and any timers that have been set will
continue their countdown.
To Unlock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds.

Performance Boost Function

This function allows you to increase the heat setting level above
the maximum heat setting 9 for 10 minutes or less.
NOTE: Performance Boost is not available when the Bridge
function is activated.
30" (76.2 cm) Model JIC4430X
Performance Boost function is available on only 1 surface
cooking area at a time within a zone. If you attempt to use
another surface cooking area in the same zone, "P" and "9" will
briefly flash in the display before returning to heat setting level 9.
The surface cooking area that was set to the Performance boost
function will automatically reset to heat setting level 9. See the
following illustrations for zones.
A
B
Zone 1
A. Surface cooking
area 1
B. Surface cooking
area 2
36" (91.4 cm) Model JIC4536X
Performance Boost function is available on all surface cooking
areas at the same time within a zone. See the following
illustrations for zones.
A
B
Zone 1
A. Surface cooking C. Surface cooking
area 1 area 3, dual
element with
B. Surface cooking
5000W
area 2
performance
boost
D
C
Zone 2
C. Surface cooking area 3
D. Surface cooking area 4
D
C
E
Zone 2 Zone 3
D. Surface cooking
area 4
E. Surface cooking
area 5
9