4. When the Setup Type dialog box (Figure 9) appears, select Typical and click Next.
Important:
For a "Typical" install, you must have Mixed Mode authentication enabled in
SQL Server.
5. If the installer detects that Internet Information Services (IIS) is:
§
Installed, go to Step 6 to continue.
§
Not installed, you will be prompted that the software is not installed (Figure
10). Click OK and the Installer Completed dialog box will display (Figure
11). Click Finish to exit the installer.
Chapter 4 – Installing MSP 3.2 with the Typical Setup Type 21
Figure 8
Figure 9
21