Toshiba XM-7002B Specification page 28

11.Maintenance
11.1. Disc
Try to avoid touching the read area (underside) of the disc as dirt and smears will degrade
the disc accessing speed.
If the disc is dirty, wipe it with a soft cloth.
11.2. Optical Pickup
A dirty Optical Pickup will also degrade the access time.
When the Pickup is dirty, gently wipe the objective lens of the Pickup.
12.Emergency Eject
Execute following procedure only in the case of emergency (drawer will not eject although pressing
Eject button).
(1) Turn the CD-ROM drive supplying power off, and then keep the this condition for 1 minute.
(2) Insert solid bar (like paper clip) into Emergency eject hole and push as shown in Figure 21.
Then Tray will be ejected.
13.Safety standards/Agency Approvals
(1) Safety
(2) Laser
(3) EMI
(4) CE
(5) EMI
15 mm
diameter 1.0 mm
Figurer 21 Insert the bar
EN60950
UL 1950
CAN/CSA-22.2 No.950
FDA CFR21, EN60825
FCC 15J - B
EN50081-1 :1992 [Residential, commercial & light industry]
EN55022+A2 :1994+1997 [Class B]
EN55024 :1997 [Information tecnology equipment-Immunity
IEC61000-4-2+A1:1995+1998 [CD:4 kV, ID: 4 kV, AD:8 kV]
IEC61000-4-3 :1996 [3 V/m, 80-1000 MHz, 1 kHz 80 % AM ]
IEC61000-4-4 : 1995 [AC-line: 1 kV, f: 5 kHz, Polarity:+/- ]
IEC61000-4-5 : 1995 [AC-line: 1 kV/2 kV, Polarity:+/- ]
IEC61000-4-6 : 1996 [3 V, 0.15-80 MHz, 1 kHz 80 % AM]
IEC61000-4-8 : 1993 [1 A/m, 50 Hz]
KOREAN EMI Regulation (RRL)
characteristics-Limits and methods of
measurement]
24/27
XM-7002B Rev.1.0