Remote Start Info - Viper 4704 Owner's Manual

Off after 72 hours if the remote control is not used during this
period. Just press any button to resume system monitoring. When
set to
ON
from the system. When set to
remote start or factory alarm trigger pages.
Note: When
is performed but alarm trigger pages will not be received.
Page Alert
Options:
TONE VIBE
There are several ways for the Responder LC to alert you when it
has received a message from the system.
TONE VIBE
lect
TONE
sage. Select
with a gentle vibration, or select
want to be interrupted.

Remote Start Info

Options:
The text field can be set to display the information you prefer dur-
ing remote start.
interior Temperature, or the
field while Remote Start is on.
© 2011 Directed Electronics. All rights reserved.
it wakes up every few seconds to listen for pages
, responses are still received when a command
OFF
,
TONE
alerts by emitting tones and vibrating the remote. Se-
alerts by emitting tones that are unique for each mes-
and the Responder LC will silently alert you
VIBE
,
RUNTIME TEMP
RUNTIME
it does not wake up to receive
OFF
, ,
VIBE SCREEN ONLY
SCREEN ONLY
,
CLOCK
: Remote Start Runtime,
will be displayed in the text
CLOCK
when you don't
: vehicle
TEMP
23