Network Configuration Setting - NComputing OfficeStation L110 User Manual

FAQ

Network Configuration Setting

Q
How do I connect the OfficeStation directly to the Host PC?
A
Use a crossover adapter to connect the OfficeStation terminal
to the Host PC. If you use a crossover cable to connect to the
Host PC, you do not need a crossover adapter. You can only
directly connect one OfficeStation to a Host PC by using a LAN
adapter. To connect several OfficeStations you need to install
as many LAN adapters equal to the number of OfficeStation
terminal(s) that will be connected to the Host PC.
Q
How do I use a dynamic IP address when the Host PC is connected to a router?
A
A router allocates the IP address dynamically to the Host PCs and
OfficeStation terminal(s). Users do not need to set the IP address.
Set the network configuration to dynamic IP address in the set up
window.
<Host PC>
<Cross Cable>
<Dynamic IP>
<OfficeStation>
<Dynamic IP>
<Dynamic IP>
<Dynamic IP>