NComputing OfficeStation L110 User Manual page 36

Turn on the OfficeStation terminal for configuation
settings. Click the "Setup".
<Press the power button of OfficeStation.>
In the "Network" tab, check "Use Static IP address" and input IP and Gateway address
as below. (For example, IP address is 192.168.0.1 and Subnet mask is 255.255.255.0.
According to Host PC's configuration, the IP address should be different)
In the "TS Options" tab, input the Terminal
Server Network address as below. (Terminal
Server Network address : 192.168.000.001)
or
*only use this address if it follows your IP
addressing scheme.
If you have finished the settings, click "Save"
then click "Connect".
Your OfficeStation terminal should be connected to the Host PC. You are now ready to use your OfficeStation terminal.