3.5G - Edimax 3G-6200nL Manual

2-4-1 3G/3.5G
3G-6200nL supports most of 3G/3.5G modem cards, just connect the
modem card to the USB port of 3G-6200nL and 3G-6200nL will
recognize it automatically, no additional setup procedure required.
However, some of modem cards require PIN code or account / password
(you have to use 3G-6200nL's web interface to input these information),
and some modem cards requires you to connect the modem card with
your PC and install driver / utility before you connect it with 3G-6200nL
(all PCs which need to access Internet by 3G-6200nL requires to perform
this procedure once). If you still not able to connect to Internet, please use
wired Internet connection to access our website :
http://www.edimax.com/ , download latest version of firmware and
upgrade 3G-6200nL's firmware. If you still not be able to get connected
by your 3G/3.5G modem card, please contact your dealer of purchase and
provide the model name of the 3G/3.5G modem card you have, we'll try
our best to help you to solve the problem.
Only one Internet connection (wireless / wired) can be used at the same
time. Wireless connection (3G/3.5G) will be selected first, and use wired
Internet connection as backup. Therefore, please DO NOT connect your
3G/3.5G modem card with 3G-6200nL, or your telecomm service
provider may charge you with high communication fee. The default
setting is for you to connect with computer or switch to extend network.
If you would like to access Internet via xDSL/Cable modem, you can
login 3G-6200nL to enable WAN function. For example, if you connect
3G/3.5G modem card with 3G-6200nL when you're using wired Internet
connection, wired connection will be dropped and use 3G/3.5G wireless
connection instead. If 3G/3.5G wireless signal reception is poor and the
connection can not be restored within 60 seconds, 3G-6200nL will use
wired Internet connection again, and will not switch back to wireless
Internet connection (This only happens with wired Internet connection is
available. If wired connection is unavailable, 3G-6200nL will try to
establish 3G/3.5G wireless connection again and again). If you want to
use 3G/3.5G wireless connection again, you need to remove 3G/3.5G
modem card from 3G-6200nL and reconnect it back after 5 seconds.
( A ) Plug and play, no setup procedure required.
Connect the USB 3G/3.5G modem card with 3G-6200nL and make sure
the corresponding USB LED indicator of 3G-6200nL lights up, then you
can use the web browser to access Internet.
30