Restoring Your Router To Factory Defaults - Belkin N150 User Manual

USING YOUR ROUTER

Restoring Your Router to Factory Defaults

Resetting the Router will restore the Router's normal operation
while maintaining the programmed settings. Reset the Router
in rare cases when the Router may function improperly.
Using the Reset Button
Use the restore option in instances where you may have forgotten
your custom password or when the Router may function improperly.
Push and hold the "Reset" button for 8-10 seconds, and then
release it. The LAN light on the Router will momentarily flash
and the WLAN light will turn out. When the LAN and WLAN
lights become solid green again, the reset is complete.
Restoring the Router to Default Settings Using the Web Interface
You can also restore the factory defaults using the web interface.
This may be because the Router is not performing as expected
or you wish to remove all previously configured settings.
Setup Steps
Click on "Restore Factory Defaults" in the left-
hand column under the "Utilities" heading.
26