Advertisement
DESCRIPTION OF BUTTONS ON REMOTE CONTROL
REMOTE CONTROL
Load/unloading battery of remote control
1.
Please remove insulating sheet out of remote control before use.
Pull out insulating sheet in the direction as per fig. 1.
2.
When changing battery for remote control, first pull the movable block hold
in the direction as indicated in Fig. 2 arrow A. Then pull the battery holder out
from the remote control in the direction as indicated in Fig.2 arrow B.
3.
Replace the old battery by a new battery with (+) polarity side upward. Then
return the battery holder to the remote control by pressing the battery holder.
Please see Fig.3.
Note about the battery of remote control:
1.
Improper use of battery may cause overheating or explosion. Which may result
in jury or fire .
2.
Battery leakage may cause damage to the remote control(Battery Life: 6
months with normal use in normal room temperature).
3.
Do not short the battery.
4.
Do not throw the battery into the fire.
5.
To avoid the risk of accident, keep the battery out of reach of children.
REMOTE CONTROL
1. Power On/Off
2. Mute Button
3. Loudness Button
4. Level/MENU UP Button
5. SEL/MENU Button
6. Level/MENU Down Button
7. MO/ST Button
8. A.P Button
9. Band Button
10. Mode Button
11. Tune/Seek Up/
Track Skip Up/FF Button
12. Tune/Seek Down/
Track Skip Down/REW Button
13. SCAN BUTTON
14. Clock Display /Setting Button
15. LOC/DX Button
16. TOP/>||/Radio Preset 1
17. INT/Radio Preset 2
18. RPT/Radio Preset 3
19. RDM/Radio Preset 4
20. Radio Preset 5
21. Radio Preset 6
Advertisement
