Important Safety Instructions - Behringer TUBE ULTRAGAIN MIC200 Quick Start Manual

2
TUBE ULTRAGAIN MIC200
Important Safety
Instructions
Terminals marked with this
symbol carry electrical current
of sufficient magnitude to
constitute risk of electric shock. Use only
high-quality professional speaker cables
with ¼" TS or twist-locking plugs
pre-installed. All other installation or
modification should be performed only by
qualified personnel.
This symbol, wherever it
appears, alerts you to the
presence of uninsulated
dangerous voltage inside the enclosure -
voltage that may be sufficient to constitute
a risk of shock.
This symbol, wherever it
appears, alerts you to
important operating and
maintenance instructions in the
accompanying literature. Please read
the manual.
Caution
To reduce the risk of electric
shock, do not remove the
top cover (or the rear section). No user
serviceable parts inside. Refer servicing to
qualified personnel.
Caution
To reduce the risk of fire or
electric shock, do not expose
this appliance to rain and moisture.
The apparatus shall not be exposed to
dripping or splashing liquids and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
Caution
These service instructions are
for use by qualified service
personnel only. To reduce the risk of electric
shock do not perform any servicing other
than that contained in the operation
instructions. Repairs have to be performed
by qualified service personnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus
near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not fit into your outlet, consult
an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Use only attachments/accessories
specified by the manufacturer.
12. Use only
with the cart,
stand, tripod,
bracket, or table
specified by the
manufacturer, or sold
with the apparatus. When a cart is used,
use caution when moving the cart/
Quick Start Guide
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during
lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
15. The apparatus shall be connected to
a MAINS socket outlet with a protective
earthing connection.
16. Where the MAINS plug or an
appliance coupler is used as the disconnect
device, the disconnect device shall remain
readily operable.
LEGAL DISCLAIMER
TECHNICAL SPECIFICATIONS AND
APPEARANCES ARE SUBJECT TO CHANGE
WITHOUT NOTICE AND ACCURACY IS NOT
3