Gateway FPD-1940 User Manual page 7

4
If your computer supports analog video (blue video connector), connect the analog
video cable to the blue analog connector under the bottom of the screen.
- OR -
If your computer supports digital video (white video connector), connect the digital
video cable to the white DVI connector under the bottom of the screen.
Important
5
Return the monitor to its upright position.
6
Make sure that your computer is turned off.
Make sure that you only connect one video cable to the monitor and
computer. The only way to use both connections it to share the
monitor between two computers. Use the SOURCE button to change
between computers. For more information, see "Adjusting monitor
settings" on page 7.
www.gateway.com 3