Table of Contents
Advertisement
3
After your computer is running, the power LED on the monitor should be
green.
Allow about 10 seconds for the display image to appear. If the power LED
is not green or you do not see a display image, check the connections. For
more troubleshooting information, see "Troubleshooting" on page 21.
4
Adjust the tilt of the monitor for the best viewing angle.
5
Use the on-screen display (OSD) to adjust other monitor settings. For more
information, see "Adjusting monitor settings" on page 8.
Power LED
www.gateway.com
Starting the monitor
7
Advertisement
Table of Contents
