Using Dvi (Same As Hdmi But Requires An Audio Connection) - Insignia NS-32D201NA14 User Manual

Insignia 32" LED TV

Using DVI (same as HDMI but requires an audio connection)

Note
You must use the HDMI 1 (DVI+ARC) jack to connect a DVD or Blu-ray
player using DVI. If you use another HDMI jack, you will not hear sound from
the TV speakers.
On your TV
HDMI cable 3.5mm audio
connector cable
connectors
HDMI 1
PC/DVI
(DVI+ARC)
AUDIO IN
jack
jack
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the DVD or Blu-ray player.
3 Connect the other end of the cable to the HDMI 1 (DVI+ARC) jack on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the
AUDIO OUT jacks on the DVD or Blu-ray player.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
5 Plug your TV's power cord into a power outlet, then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to select HDMI 1, then press ENTER.
DVD or Blu-ray player
www.insigniaproducts.com
Side of TV
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Back of TV
20