Asus A55BM-PLUS User Manual page 62

2.8.2 Boot Logo Display [Enabled]
Boot Logo Display [Auto]
[Auto]
[Full Screen]
[Disabled]
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Enabled]. This item allows you to
select the desired additional POST waiting time to easily enter the BIOS setup. You can only
execute the POST delay time during Normal Boot. The values range from 0 to 10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you to
select a desired post report waiting time. The values range from 1 to 10 seconds.
2.8.3 Bootup NumLock State [On]
[On]
[Off]
2.8.4 Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.8.5 Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
2.8.6 Interrupt 19 Capture [Disabled]
[Enabled]
[Disabled]
2.8.7 Setup Mode [EZ Mode]
[Advanced Mode]
[EZ Mode]
2-30
Adjust automatically for Windows® requrement.
Maximize the boot logo size.
Hide the logo during POST.
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Allows the option ROMs to trap Interrupt 19.
Disables this function.
Sets Advanced Mode as the default screen for entering the BIOS
setup program.
Sets EZ Mode as the default screen for entering the BIOS setup
program.
Chapter 2: BIOS information