Waypoints; Mark Waypoint Page - Garmin Rino 120 Owner's Manual

U O > W
NIT PERATION AYPOINTS

Waypoints

There are numerous ways to create, edit, and use
waypoints. The Mark Waypoint Page and the Find 'N Go
Menu are two common pages for creating and editing
waypoint. You can also create a waypoint using the Map
Page. The Rino 120 holds up to 500 waypoints.

Mark Waypoint Page

The Mark Waypoint Page allows you to mark and record
any location as a waypoint. It appears with a graphic
name block that displays the assigned number for that
waypoint and a waypoint symbol.
Waypoint
Name
Mark Waypoint Page
40
Symbol
Waypoint
Details
To mark your current location and open the
Mark Waypoint Page:
1. Press and hold the Thumb Stick In until the
Shortcuts Menu opens.
2. Highlight Mark Waypoint and press the Thumb
Stick In. The Mark Waypoint Page opens. You
can also access this page by highlighting Mark
on the Main Menu Page and pressing the Thumb
Stick In.
3. To save the waypoint, highlight OK and press the
Thumb Stick In. If you do not want to save it as a
new waypoint, press the Page key to cancel.
To change Mark Waypoint Page Options:
• To change the name of the waypoint, use the
Thumb Stick to highlight the waypoint name field.
• To assign an identifying symbol to a waypoint, use
the Thumb Stick to highlight the symbol block just
above the waypoint name.
• To view the waypoint details, highlight the details
field and press Left or Right on the Thumb Stick
to change to the next data field.
Rino 120 Owner's Manual
®