Mp3 Player; Easylink - Philips HTS3541 User Manual

Button Action
/ Select a preset radio station.
or
Alphanumeric
buttons
Navigation
Search for a radio station.
buttons (left/
right)
Navigation
Fine tune a radio frequency.
buttons (up/
down)
Press to stop the installation
of radio stations.
BACK
Press and hold to erase the
preset radio station.
OPTIONS
Manual:
1) Press
2) Press
your preset. 3) Press
OPTIONS again to store the
radio station.
Automatic: Press and hold
for three seconds to reinstall
the radio stations.
Listen to radio
1
Press RADIO.
• To listen to a preset station, press
or .
• To search for a radio station, and then
listen, press Navigation buttons (left/
right).
2
Press +/- (Volume) to change the volume.

MP3 player

Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
EN
21
OPTIONS.
/ to select
Play music
1
Connect the MP3 player to the home
theater as described in the Quick start
guide.
2
Press AUDIO SOURCE repeatedly until
'MUSIC I-LINK' appears on the display
panel.
3
Press the buttons on the MP3 player to
select and play audio files or music.

EasyLink

The home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI can be controlled by a single remote
control.
Philips does not guarantee 100%
interoperability with all HDMI-CEC devices.
What you need
• HDMI-CEC compliant devices.
• An HDMI connection between the
connected devices.
Switch on
1
On the TV and other connected devices,
turn on the HDMI-CEC operations. For
details, see the manual of the TV or other
devices.
2
Press (Home).
3
Select [Setup], and then press OK.
4
Select [EasyLink] > [EasyLink], and then
press OK.
5
Select [On], and then press OK.
Control devices
Control the home theater and the other
connected HDMI-CEC compliant devices with
a single remote control.