Philips HTS3541 User Manual page 14

LAN
1
Connect the home theater to a network
router through a wired connection (see
'Wired connection' on page 13).
2
Turn on your TV, and switch to the correct
source for the home theater.
3
Press (Home).
4
Select [Setup], and then press OK.
5
Select [Network] > [Network
Installation] > [Wired (Ethernet)], and
then press OK.
6
Follow the instructions on the TV to
complete the setup.
» The home theater connects to the
internet. If connection fails, select
[Retry], and then press OK.
7
Select [Finish], and then press OK to exit.
Check wired network settings
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Network] > [View Network
Settings], and then press OK.
» The current network settings are
displayed.
www
EN
14