Philips 50PFL4008G User Manual page 13

Manage channel lists
After the channels are installed, you can:
x
Filter channels.
x
Switch between antenna and cable
channels.
x
Rename channels.
x
Lock a channel.
Filter channels
1. While you watch TV, press
2. Press OPTIONS, then select [Filter].
3. Select an option, then press OK.
x
[Digital + Analog]: Display all channels
in the channels list.
x
[Digital TV channels]: Display only
digital channels.
x
[Analog channels]: Display only analog
channels.
x
[Free / scrambled]: Display all channels
in the channels list.
x
[Scrambled channels]: Display only
scrambled channels.
x
[Free channels]: Display only free
channels.
Note: The filtering options may vary
according to your broadcaster.
Switch between antenna and cable channels
You can switch between antenna and cable
channels.
1. While you watch TV, press
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Antenna
connection].
3. Select [Antenna] to watch antenna
channels or [Cable] to watch cable channels,
then press OK.
LIST.
.
Rename channels
When you select a channel, its name
appears. You can change this channel name.
1. While you watch TV, press
The channel list is displayed.
2. Select the channel to rename, then press
OPTIONS.
3. Select [Rename], then press OK.
The onscreen keyboard is displayed.
4. Press the Navigation buttons to select
each character, then press OK.
5. Once complete, select [Done], then press
OK to confirm.
Lock a channel
You can prevent unauthorized access to
channels by locking them.
1. While you watch TV, press
The channel list is displayed.
2. Select the channel to lock, then press
OPTIONS.
3. Select [Lock channel], then press OK.
4. If prompted, enter the pin code.
The channel is marked with a lock icon in
the channels list.
Tip: To watch a locked channel, enter the
pin code when prompted.
Watch connected devices
Before you can watch a device, connect the
device to the TV. See Connect your TV >
Connect devices (Page 34).
Select a device with SOURCE
1. Press SOURCE.
2. Select a device, then press OK.
Select a device from the Home menu
1. Press .
2. Select [Source], then press OK.
3. Select the device, then press OK.
To add or manage your connected devices,
see Connect your TV > Watch connected
devices > Change device settings (Page 43).
LIST.
LIST.
EN 13