Install The Software - Epson STYLUS COLOR 440 Start Here Manual

2
2

Install the Software

Install the Software
Now that you've set up your printer, you're ready
to install the software from the CD-ROM
attached to the front of this card.
The CD-ROM includes:
The printer driver that lets you print; you
must install this for the printer to work
correctly
Creative software, including the EPSON
Guided Printing Exercise and Polaroid
™
PhotoMAX Family Pack
Your electronic EPSON Stylus COLOR 440
Manual
Note:
If you don't have a CD-ROM drive, you
can download the drivers or order
diskettes from EPSON. See "Ordering
Printer Software Diskettes" in the
Printer Basics book.
Keep this card with you as you install your
printer software so you can refer to it when you
need it.
Caution:
If you see a screen telling you that
Windows has detected your printer and
to install a driver, always select Cancel.
You can't install your software that way.
1. Make sure your printer is connected to the
computer and that both are turned off.
2. Turn on your computer, but leave your printer
turned off. Do not turn your printer back on
until you have completed the software
installation.
3. After you see the Windows desktop icons, insert
the EPSON Stylus COLOR 440 CD-ROM.
The CD-ROM starts automatically.
4. You see the EPSON screen and then the Software
License Agreement screen. Read the agreement
®
and then click
5. Follow the on-screen instructions to install your
software. The printer software installation is in
two parts. First the printer driver is installed.
Click
Then you'll be prompted to install
Status Monitor 2. Click
when you see this screen:
Note:
If it doesn't start automatically, double-
click the My Computer icon, then
double-click the Epson (E:) icon (for
your CD-ROM drive). Double-click the
Epson.exe icon to start the installer.
Agree to continue.
OK when you see this screen:
Next to install it