About This Manual; Minimum System Requirements; Software Requirements - Garmin USB Data Card Programmer User Manual

Introduction
Thank you for choosing the GARMIN USB Data Card Program-
mer. To get successful results from your new programmer, take time to
read through this user' s manual in order to fully understand all of the
operating procedures.
This manual is organized into three sections:
The Introduction section provides licensing agreement informa-
tion and a description of the programmer.
The Installation section introduces you to basic features and
procedures for programmer setup.
The Trouble Shooting section contains information for finding
solutions to installation and operating problems.
Standard Package Contents
USB Data Card Programmer
CD-ROM with USB Device Drivers for Windows 98 and
2000, and GARMIN MapSource
including USB Support.
User' s Manual
MapSource User' s Manual Addendum for the USB Data
Card Programmer
TM
Upgrade Software
Introduction

About This Manual

Minimum System Requirements

IBM-Compatible PC with Pentium processor, 16
Megabytes RAM, CD-ROM drive, Mouse or other
pointing device, 256-color display adapter (24-bit
color recommended) and monitor with 640 x 480
resolution or higher, and up to 20 Megabytes free
hard drive space. A 32 bit operating system such as
Windows 98 or Windows 2000. Universal Serial
Bus port (USB). The USB Data Card Programmer is
not designed to operate with Windows 95 or
Windows NT.

Software Requirements

Existing installation of GARMIN MapSource
upgraded to Version 3.04 or later.
Windows 95, Windows NT, Windows 98, and Windows
2000 are registered trademarks of Microsoft Corporation.
i