Creating A User Dsp - Casio CTK-6300in User Manual

Applying Effects to a Sound
5.
Use the dial or R-14 (–, +) buttons to select the
preset DSP you want to use.
• DSPs with the leading numbers 001 through 100 (and
"ton") are preset DSPs. See "Preset DSP List" on page
E-118 for information about preset DSP numbers and
names.
• DSP types with the leading numbers 101 through 200
are user DSPs. For details, see "Creating a User DSP"
(page E-36).
6.
Press the C-5 (EFFECT) button or the R-15
(EXIT) button.
• This exits the effect setting screen.
• A pointer indicator is displayed next to DSP when "DSP" is
selected for the "Chorus/DSP" setting.
• You also can adjust how a DSP is applied (DSP output
enabled/disabled, DSP output volume, DSP output pan,
etc.) For details, see "Using the Mixer" (page E-38).
E-36

Creating a User DSP

You can create a user DSP by editing one of the built-in
preset DSPs.
User DSP Numbers
DSP areas numbered 101 through 200 are for storage of user
DSPs. You can have up to 100 user DSPs stored in memory
at one time. To recall a stored user DSP, use the same
procedure you use to recall a preset DSP. See "To use a
DSP" (page E-35) for more information.
To create and save a user DSP
1.
Referring to the "DSP Type List" (page E-119),
select the DSP type you want to edit in order to
create your user DSP.
2.
Use the R-17 (y) button to move the 0 to "DSP
Edit".
3.
Press the R-16 (ENTER) button.
• This displays page one of the DSP editor screen. Use
this screen to select the DSP type.
DSP type
• You can use the R-17 (u, i) buttons to scroll
between pages.
4.
Use the dial or R-14 (–, +) buttons to select a
DSP type.
Total number of pages
Currently displayed page
DSP number