Garmin 190-01098-00 Owner's Manual page 36

Vhf 300 series
Hide thumbs Also See for 190-01098-00:
Table of Contents

Advertisement

Advanced Operation
Selecting NMEA 0183 or NMEA 2000
This setting determines whether you are connected to a NMEA 0183 network or a NMEA
2000 network. The radio can only communicate over one network type at a time.
To configure a VHF 300 or a VHF 300i:
1. Press the
MENU
2. Select
COMMUNICATIONS
3. Select
NMEA2000
To configure a VHF 300 AIS or a VHF 300i AIS:
MENU
1. Press the
2. Select
COMMUNICATIONS
3. Select
NMEA2000
4. If you selected NMEA0183, select one of the following options:
If AIS is disabled, select
If AIS is enabled, you can only select
MMSI (Vessel) Filtering over a NMEA Network
Your radio can send call-related data over NMEA 0183 or NMEA 2000 when it receives
distress calls, acknowledgements to position request calls, and other position-send calls. You
can filter the MMSI numbers (vessels) for which your radio sends this data in three ways:
any MMSI number (all vessels), no MMSI numbers (no vessels), or select MMSI numbers
(vessels selected from your directory).
When you configure the radio to send data for select vessels, and you receive an
acknowledgement to a position request call, or other position-send call from an MMSI
number not in your directory, your radio does not send NMEA data for that call. Distress
call information will still be sent. For more information about NMEA output from your
radio, see
page
49.
Configuring MMSI Filtering for Select Vessels
1. Press the
MENU
2. Select
COMMUNICATIONS
ALL VESSELS
to send data when you receive a call from any MMSI number, or select
NO VESSELS
to not send data for any MMSI number.
3. Select the vessel in your directory.
4. Select from the following options:
ON—the radio will send call-related data over your NMEA network when you receive
a distress call, an acknowledgement to a position request call or other position send
call from this vessel.
30
key.
> PROTOCOL.
or NMEA0183.
key.
> PROTOCOL.
or NMEA0183.
NMEA STANDARD
key.
>
DSC OUTPUT
or
NMEA HIGH
NMEA HIGH
SPD.
>
SELECT
VESSELS. You can also select
VHF 300 Series Owner's Manual
SPD.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vhf 300Vhf 300iVhf 300 aisVhf 300i aisVhf 300 series

Table of Contents