Garmin VHF300 Instruction Manual
Hide thumbs
Also See for VHF300:
- Safety and product information (20 pages) ,
- Owner's manual (62 pages) ,
- Installation instructions manual (12 pages)
Related Manuals for Garmin VHF300
Summary of Contents for Garmin VHF300
- Page 1 Standard Configuration Power NMEA2k port Port port Accessory port port 10meter Extension Cable Optional Configuration Please use same cable that was provided for VHF200. 10meter Extension Cable DC12V 10meter Extension Cable...
- Page 2 Items listed below were sent for testing. VHF300 BASE Q’ty : 3 Handset with Audio input/output terminals Speaker with Audio output terminals / White resin material Q’ty : 3 Q’ty : 3 --Note-- --Note-- Please do not use the Handset which this arrangement was given for EMC TEST.
- Page 3 1. Press to turn on power. 2. Press and hold to turn off power. TX power setting mode. *Press the Left soft key to select TX power. 1. 1 press to enter Squelch setting. 2. 2 press to enter Volume setting. “3.5mm Jack”...
- Page 4 Enter the Test Mode testing the Modulation of DSC . Step-1. Enter the Test Mode 1. Turn off power. 2. Press and hold “MENU” + “16”. Step-2 Enter the Key code Please enter the Key code as follow. 155.050 LO POWER CLEAR>>Center softkey>>Left softkey>>Right sofykey LEVEL:050 Screen will be as right image.
- Page 5 1 Testing of FSK modulation of DSC. Set to DSC Modulation test Mode. 1. Change the Test Mode to “DSC MOD”. 156.550 Press “-“ soft key to change the channel to CH70. DSC MOD LEVEL:050 FSK:1300HZ PRESS OK Testing Y-state / 1300Hz modulation 1.
- Page 6 2 Testing of FSK modulation of ATIS. Set to ATIS Modulation test Mode. 1. Change the Test Mode to “ATIS MOD”. 156.800 Press “+“ or “-“ soft key to change the channel to CH01,CH02 or CH03. ATIS MOD Frequency of the Test Mode Channels are as follow. LEVEL:050 FSK:1300HZ CH01 : 156.050MHz...