Signal - Bosch WAP24200UC Use And Care Manual

Leave the front door and detergent drawer open so
▯
that any remaining water can dry up.
Always wait for the end of the cycle; otherwise the
▯
appliance may still be locked. If locked, switch the
appliance on and wait until it unlocks.

Signal

1. Activate adjustment mode for the signal volume
Place on Ú .
2. Setting volume for button signals (depending on the model)
Press until the desired volume has been reached.
3. Setting volume for indicator signals
Turn one position to the
right.
Hold Spin speed button down + turn one posi-
tion to the right.
Press until the desired volume
has been reached.
If at the end of the cycle the display is not lit up, the
▯
energy saving mode is active. To see display, press
any button.
Hold down for an additional 5 s until the
display elements light up. Adjustment
mode is activated.
to 3. or
in order to exit the adjustment mode for the sig-
Ú
nal volume.
Ú in order to exit the adjustment mode for the signal
volumen.
25