Electrical Requirements; Care And Cleaning - GE DDC4500TWH Installation Instructions Manual

8 ELECTRICAL CONNECTION INFORMATION
WARNING
OF FIRE, ELECTRICAL SHOCK, AND
PERSONAL INJURY:
DO NOT USE AN EXTENSION CORD
OR AN ADAPTER PLUG WITH THIS
APPLIANCE

ELECTRICAL REQUIREMENTS

This appliance must be supplied with 120V, 60Hz, and
connected to an individual, properly grounded branch
circuit, protected by a 15- or 20-amp circuit breaker or
time delay fuse If electrical supply provided does not
meet the above speci cations, it is recommended that
a licensed electrician install an approved outlet
WARNING
- THIS DRYER IS
EQUIPPED WITH A THREE-PRONG
(GROUNDING) PLUG FOR YOUR
PROTECTION AGAINST SHOCK HAZARD
AND SHOULD BE PLUGGED DIRECTLY
INTO AN INDIVIDUAL, PROPERLY
GROUNDED THREE-PRONG RECEPTACLE
DO NOT CUT OR REMOVE THE
GROUNDING PRONG FROM THIS PLUG
ENSURE PROPER GROUND EXISTS BEFORE USE
EXTERNAL GROUND (IF REQUIRED)
ATTACH GROUND WIRE (OBTAIN
LOCALLY) TO EACH DRYER
Installation Instructions
- TO REDUCE THE RISK
ADJUSTING FOR ELEVATION
NOTE TO INSTALLER
AFTER INSTALLATION CHECK THE FOLLOWING:

CARE AND CLEANING

USER MAINTENANCE INSTRUCTIONS
The Drum
The Exterior
The Lint Filter
Dryer Exhaust
To store dryer
CAUTION
:
REGISTER YOUR NEW APPLIANCE TO RECEIVE ANY
IMPORTANT PRODUCT NOTIFICATIONS