On main roads, the distance to an exit calculated by the Navman may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while the Navman shows the distance to the next intersection, i.e., the end of the exit ramp or road.
Terms ............................5 How do I use the touch screen?......................6 How do I get started?..........................7 How do I turn my Navman on for the first time? ................7 Home screen ............................8 How do I go from A to B? ........................9 What if I miss a turn? ........................9 Using the Keyboard screen......................10...
Page 4
FM Radio ............................49 How do I receive audio through my vehicle speakers?.................50 How do I set the audio output channel of my Navman through my car’s FM radio? ......50 How do I receive current traffic information? ..................51 How does my Navman receive traffic information? .................51 Traffic status..........................51...
This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference.
How do I use the touch screen? Your Navman touch screen options change dynamically: To see all options on a menu, drag the screen up or down. To display the next screen, tap an icon or select an option. To dock a menu to the left, tap the left edge of the menu. To dock a menu to the right, tap the right edge of...
How do I get started? The first time you use your Navman, it may take up several minutes to establish a GPS connection. For more information about GPS, refer to the GPS Frequently Asked Questions guide on the enclosed DVD.
The Home screen is your starting point for searching for a destination. The Home screen also allows you to customize your Navman, receive updated traffic information and make and receive phone calls. The Home screen can be accessed from the map screens by tapping on your Navman.
How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... Then ...
Predictive text allows addresses to be searched by a single key-press for each letter, as opposed to the multiple key- presses. As you enter a letter of an address, your Navman will compare all possible combinations against the maps you have installed and determine which address you intended to type.
How do I plan my first trip? Using your Navman to plan your first trip is easy. There are several ways to select your destination. Complete the following to navigate to a street address that you know using the GO address wizard.
How do I view my route? When a route has been calculated, the Map screen will display. You will be directed to your destination by spoken and visual instructions. Item Description The direction and distance to your next turn Direction and distance of next turn to repeat the vocal instruction.
How do I search for an address using the FIND address wizard? The below address is fictitious and used as an example only. 6 Navman Street Hackney, London United Kingdom...
Page 14
Complete the following: If you want to ... Then ... tap GO. calculate the route, open the Map screen and The Map screen will display. start navigating tap Add to My Places. save the location as Home The Save screen will display. tap Save as Home.
How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums. Buckingham Palace London, England Complete the following:...
How do I set my route preferences? You can enhance your navigation experience by modifying aspects of your route and route calculations. From the GO screen, tap Other options. The Other options screen will display. Complete the following: If you want to... Then...
How do I use the Explore map? The Explore map allows you to explore the local area to find Points of Interest (POIs) or navigate to an address. If you do not have a GPS fix, the map will display your last known position. Tap and drag the map to explore the local area.
How do I explore an area for a POI? An amusement park near London Eye, London.
Page 19
Complete the following: If you want to ... Then ... tap GO. calculate the route, open the Map screen and The Map screen will display. start navigating tap Add to My Places. save the location as Home The Save screen will display. tap Save as Home.
How do I explore a map for a POI? If you want to ... Then ... tap GO. calculate the route, open the Map screen and The Map screen will display. start navigating tap Add to My Places. save the location as Home The Save screen will display.
How do I set my POI preferences? Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable other categories such as schools.
How do I preview a route? Route simulation allows you to: Preview a route. Plan and view a route without a GPS fix, for example when you are inside a building. The following steps will show you how to preview a route: Select a departure point.
How do I view my route statistics? Your Navman provides information on your: distance to go estimated time of arrival distance travelled average speed maximum speed time taken for trip stationary time. To view your route statistics during a planned route: and then tap The GO screen will display.
How do I navigate to a recent place? To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent places. Tap Recent places. The Preview screen will display.
Page 25
If you want to ... Then ... tap Explore this area. explore the area near the location The Explore Map will display. tap the docked menu to see the menu options. The Explore screen will display. Complete one of the following: tap Streets to explore streets near your location tap Areas to explore areas around your location tap a POI category to explore POIs near your...
My Places My Places has all your saved and captured locations. It also contains POIs, NavPix and albums you have downloaded onto your Navman via NavDesk. How do I save a location as My Place or Home? Search for an address until the Preview screen is displayed.
The Preview screen will display. Tap Go. Your Navman will calculate the route from your current location. The Map screen will display. How do I navigate to Home? If you have not set an address as Home, the first time you try to navigate to Home you will be prompted to search for an address using the address-entry wizard.
How do I edit the name of a location in My Places? From the My Places screen, select a favourite to edit. The Preview screen will display. Tap on the favourite name. The Keyboard screen will display. After you have edited the name, tap OK. The Preview screen will display.
How can I view a POI I have downloaded using NavDesk? Tap the POI you want to travel to. The Preview screen will display. Complete one of the following: If you want to ... Then ... tap GO. calculate the route, open the Map screen The Map screen will display.
How do I navigate to a NavPix? Pictures that contain GPS co-ordinates are called NavPix and can be used to navigate to the GPS location. To navigate to a NavPix location, either a GPS fix must have been available when the NavPix was taken, or GPS co-ordinates have been added using NavDesk.
How do I navigate to a NavPix in an album? The albums contain all your photos and displays them as thumbnails. Element Description Displays the previous screen Slide Show Displays all images in the album as a full-screen slideshow. Album title The title of the album.
Pick on map Displays the Pick on map screen. Explore Display the Explore map screen Delete Deletes the NavPix from the album on your Navman or memory card. Mode Toggle between Driving and Walking modes. Thumbnail A thumbnail of the NavPix.
How do I delete NavPix from an Album? NavPix can be deleted from an Album on your Navman internal memory or your memory card. When a NavPix has been saved as a Favourite destination, you will not delete the Favourite if you subsequently remove the NavPix.
How do I save a NavPix under My Places? You cannot save a NavPix as a favourite if GPS co-ordinates are not available. From the Album screen, tap a NavPix. The NavPix Details screen will display. Tap Add to My Places. The Save screen will display.
How do I capture the GPS co-ordinates of my location? Your Navman has a capture feature which allows you to record GPS co-ordinates of a location and save them so you can navigate back at a later time. Press on your Navman.
Navman or you can navigate to POIs you have downloaded using NavDesk. To search for POIs using your Navman, you must pair your Navman with your mobile phone. If your Navman isn’t paired with your mobile phone, the Bluetooth screen will display. For more information on paring, see “How do I pair my Navman with a Bluetooth mobile phone?”...
Page 37
Tap and select your preferred search service. The Keyboard screen will display. Use the Keyboard screen to search for a POI, then tap OK. The List of Results screen will display. Select a POI. The Preview screen will display.
Page 38
Complete one of the following: If you want to... Then... tap GO. calculate the route and open Your route is calculated; the Map screen will display. the Map screen tap Call. place a phone call to the POI tap Pick on Map. navigate to a place near the The Pick on Map screen will display.
Hands-free calling is not available on all models. If you have a mobile phone with Bluetooth wireless technology, you can use your Navman as a hands-free car kit or to provide an internet connection. It can also be used to connect to a Bluetooth mono/ stereo earphone to output audio.
Enter the passcode and tap OK. The Phone menu screen will display. When you pair your headset with your Navman, a connection is established between them. The 12 most recently paired headphones will display on the Connect to headset screen.
To clear the entire number, tap and hold International calls require a country code to be included in the phone number. On your Navman, the country code is separated from the rest of the number sequence by a +. If you are making an international call, tap and hold 0 until the + sign displays.
Refer to your mobile phone user manual for more information. If there are no contacts on your Navman, you will be prompted to transfer the contact list from your phone. Your phone may disconnect, and then reconnect to your Navman during the transfer.
+ or - on the volume bar to increase or decrease the volume. make and receive calls via your tap Voice to device. Navman make and receive calls via your tap Voice to Phone. mobile phone access the map screen during tap Minimize.
The call history lists the calls made during the time your Navman is connected to a mobile phone. Numbers are arranged by time with the most recent time at the top. Your Navman can store up to 30 numbers; limited to 10 entries for incoming, outgoing and missed calls each.
How do I play media? Media is not available for all models. Media allows users to play stored video and music files installed on your Navman or on a memory card. It also allows users to play FM radio. Playing audio files If your files are in a storage card, insert the card into your Navman.
Page 46
The Songs screen will display. Complete the following: If you want to… Then… play a music file tap on the music file from the list listen to the previous music file skip the current music file pause the music file .
Playing video files If your files are in a storage card, insert the card into your Navman. Only mp4, 3gp, m4v, asf, wmv and avi video formats are supported for the video feature. How do I view a video file on my Navman? From the Media screen tap Videos.
How do I view the video file on a full screen? From the Video screen select and tap a video file you want to view on a full screen. The video file will play in a normal view. Tap on the video file. The video file can be viewed at full screen.
FM Radio To use FM radio From the Media screen tap FM Radio. The FM Radio screen will display. Complete the following: If you want to… Then… search a FM channel tap the frequency bar to select a channel. You can also tap on to search for the next or previous channel.
FM transmitting is not available on all models. Your Navman can be set to transmit sound at a particular FM frequency which you can then receive through your vehicle radio. This means that you can hear map voice guidance, radio, mp3 files and video voice files clearly and loudly through your vehicle speakers.
Traffic information is not available on all models and is only available in selected countries. Your Navman can receive current traffic information for all main roads and motorways, enabling you to avoid potential delays on your route. Event messages and traffic icons will display as they occur. If an event message obscures your current location, the map will adjust to display both the message and your location.
58. When travelling through an area in which you can receive traffic status, your Navman will decode these events and display them on-screen. An icon will display at the event location on the map screens, and an audible warning is given if an event is on your route.
Traffic Overview screen Depending on your Navman model, traffic information may not be available or may require the Traffic Accessory Kit (may be sold separately). The Traffic Overview screen displays a general overview of the traffic situation on your route, including all events in the immediate vicinity.
How do I view a list of all events on my route? Your Navman creates a list of events as they are received, which is displayed on the Event List screen. This screen can only be viewed if the TMC icon is green or orange.
How do I view traffic details? There are several ways to view details of an event received by your Navman. Choose one of the following: Location Option Tap the Event message when it appears on the map screen. From any of the map screens used The Event Details screen will display.
How do I know if a detour is recommended? When a Traffic or Clearance event occurs on your route, a detour will often be recommended. The detour event message will display in the status bar on map screens. Detours are only recommended for Traffic or Clearance Events on a calculated route. How do I avoid an event on my route? From the Traffic Overview screen, tap From the Event List screen, tap the event.
If a detour is recommended, one of the following messages will display: Message Description Finding detour..Your Navman is calculating a new route. During calculation, the % complete will display. Recalculating route..Exiting this screen before the new route is calculated will cancel the operation.
Traffic preferences You can view your current traffic system status and change options by customising the traffic preferences. TMC service The TMC service screen displays the frequency of the radio station currently used to receive traffic event information. A bar shows the strength of the traffic signal being received; the more green bars the stronger the signal. Complete the following: If you want to…...
Select event sorting type From the Traffic events screen tap the sort field. The Set sort type screen will display. Complete one the following: If you want to ... Then ... sort events by distance select the Distance option. sort events by road name select the Road name option.
Walking mode Walking mode allows you to navigate to your destination using roads and paths appropriate for a pedestrian, including non-vehicle segments. When in Walking mode, you will not be routed onto motorways and their associated on/off ramps (slip roads). If your destination is more than 10 kilometres (6.3 miles) away, a warning message is displayed indicating that the route is a long way to walk.
Volume Complete the following: If you want to... Then... move the Volume slider to the right to increase the volume. increase or decrease the volume move the Volume slider to the left to decrease the volume. Your preferences are automatically saved.
Complete the following: If you want to... Then... enable/disable a visual warning if the tap Warn me not to operate my Navman while driving, to turn it screen is accessed in a moving vehicle On/Off. enable/disable speed limit alerts tap Speed limit warnings, to turn it On or Off.
Map display Complete the following: If you want to... Then... enable/disable automatic tap Auto-zoom on main map screens. zooming during navigation If selected, the Map screens will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route. display North at the top of the tap Keep North at top of 2D Map screen.
Screen Brightness slider towards left to decrease screen brightness. Warning: Your Navman can heat up when the Brightness scale is set above 70% - i.e., when more than seven rectangles are coloured - therefore, use lower brightness whenever acceptable.
Bluetooth Bluetooth option allows you to pair and select a mobile phone or the headset with your Navman. Complete the following: If you want to... Then... enable/disable Bluetooth on your tap On/Off button on the Bluetooth screen. Navman connect to a Bluetooth mobile tap Connect to Phone option and then select a mobile phone from the list.
Language Complete the following: If you want to... Then... change the on-screen language tap your preferred language button and then tap Yes. Your language preference is saved and the map screen is displayed. The voice scheme will also change to the default scheme for the selected language.
Voice Complete the following: If you want to... Then... change the voice scheme select your preferred voice scheme from the list. Only voice schemes that are compatible with the chosen language are displayed. Your preferences are automatically saved.
Power management The Battery Status bar shows the percentage of power left in the Navman battery; the words External Power will display when the battery is charging from an external power source. To charge the battery, refer to the Hardware User Manual.
Connect Complete the following: If you want to... Then... remain connected to your mobile select Connect every time option. phone be warned before connecting to select Warn before connecting option. your mobile phone manually connect to your mobile select Do Not Connect option. phone Your preferences are automatically saved.
Units You can change the units used by your Navman by customizing the measurements preferences. Complete the following: If you want to... Then... change the time format tap Time Format and then select your preferred time format from the Units screen.
Touch audio The touch audio option allows you to hear a tone when you tap the touch screen. Complete the following: If you want to... Then... enable touch audio feature tap Touch audio.
Audio output This feature is not available on all models. Audio output allows you to change the audio output of your Navman. Complete the following: If you want to... Then... receive audio output through select the Internal Speaker option. your Navman receive audio output through the select FM and then select your FM frequency.
Delete saved information Complete the following: If you want to... Then... delete My Places tap Delete My Places. delete recent locations tap Delete Recent Locations. restore factory default settings tap Restore Factory Defaults. The Restore Factory Defaults option does not delete recent locations or saved My Places destinations.
If you want to... Then... enable the screen saver feature tap Screen saver. When you Navman is idle for more than 5 minutes the on your Navman screen saver will display. The screen saver will only display if your Navman is connected to a...
Reference Points of Interest categories Icon Description Icon Description Airport Amusement Park Art centre ATM or Cash Dispenser Bank Bar or pub Beach Breakdown Service, Car Repair Facility Bowling centre Business facility or company Business office Bus station Camping ground Car dealer/ Automobile dealer Casino Cemetery...
Stadium Tennis court Travel agency Transport ferry Veterinarian Winery Point of Interest categories by subscription Icon Description Safety Cameras Safety Camera (mobile) Safety Camera (average) Red Light Camera My Places categories by Navman Icon Description Saved location Home Album Picture...
Traffic and other TMC Events Each TMC Event is sorted in to one of nine categories. When an Event is received, one of the following icons will display: Event Avoided Event Message Type Event Description There is a dangerous situation on the route; for example, Danger people are on the road.
Safety Camera POIs Navman products are designed to be used as an aid to safer driving. You can receive messages to alert you to locations of safety cameras, which will enable you to monitor your speed through these areas. Navman does not warrant that all types and locations of safety camera data are available, as cameras may be removed, relocated or new cameras installed.
Marking labels located on the exterior of your Navman indicate the regulations that your model complies with. Please check the marking labels on your Navman and refer to the corresponding statements in this chapter. Some notices apply to specific models only.
United States and/or other countries. All rights reserved. microSD and the microSD logo are trademarks of SD Card Association. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Navman Technology Limited is under license.