Navman SmartS™ Professional for Palm OS ® Safety First It is your sole responsibility to adhere to the following safety instructions at all times. Do not operate The handheld must be placed in a position where it cannot obstruct the driver’s view of the road.
5-3 Install Maps...14 5-4 Using a Memory Card after SmartST Professional ...16 5-5 Reading this User Manual and the Quick Start Guide ...16 5-6 Visit Navman for Updates ...16 6 Confi guring the GPS Receiver ... 17 6-1 Alternative GPS Receivers ...17 6-2 Sony PEGA-CC5 Series Car Cradle ...17...
Page 5
Navman SmartS™ Professional for Palm OS ® 8 Controls... 23 8-1 Touch Screen ...23 8-2 Keyboard Entry ...23 8-3 Zooming and Scrolling ...23 8-4 Address Entry Icons...24 8-5 Changing the Volume...24 9 Setting Your Destination... 25 9-1 Using a Quick Nav ...25 9-2 Navigating to an Address...26...
Page 6
Navman SmartS™ Professional for Palm OS ® 12-1 GPS Reception ...47 13 Modifying the Settings ... 50 13-1 About Settings ...50 13-2 GPS Settings...51 13-3 Display Settings ...51 13-4 Guidance Settings...52 13-5 Map Settings...53 13-6 POI (Points of Interest) Settings ...53 13-7 Routing Settings ...54...
There are 24 satellites in total, orbiting approximately 12,000 miles above the earth. While a GPS receiver can detect signals from up to 12 satellites at any one time, only three are needed to provide the two-dimensional position or “fi x”...
Ensure your equipment meets the following requirements: 2-1 Palm Powered™ Handheld Requirements • Sony Users: CLIÉ • Palm Tungsten™ T, T2 and T3 series. Please check the Navman website for a current list of compatible models. • Palm OS •...
Navman SmartS™ Professional for Palm OS ® The SmartST Professional CD Set On purchasing the SmartS Professional for Palm OS SmartS Professional software. Map data for your region. User Manual and Quick Start Guide in Adobe® Reader® format. Adobe® Reader®.
Navman SmartS™ Professional for Palm OS ® Installing the SmartST Professional Desktop The SmartS Professional CD set contains software and map data that allows you to: • Install the SmartS Professional software onto your handheld. • Install new maps to optional memory cards.
Navman SmartS™ Professional for Palm OS ® Installing the Handheld Software and New Maps Before installing SmartS Professional onto your handheld, ensure you have completed the following steps: Your handheld was supplied with an installation CD. Ensure that the Palm™ Desktop application from that CD is installed on your computer.
Navman SmartS™ Professional for Palm OS ® 5-2 Step 2: Install SmartST Professional This procedure allows you to install the SmartS Professional Note: Before beginning, make software onto your handheld, or to upgrade existing software to a sure your handheld newer version.
Page 13
Connect to the internet. Click NEXT. or above to correctly activate the software. • Agree to the Navman Terms and Conditions. Click NEXT. • Ensure your handheld is connected to the computer and Click NEXT. • Enter the registration information. Some fi elds are optional.
Navman SmartS™ Professional for Palm OS ® 5-3 Install Maps Maps must be downloaded to one or more memory cards. This step allows you to manage the maps that you can use with SmartS Professional. The main options are: •...
Page 15
Navman SmartS™ Professional for Palm OS ® Maps available on the current CD are shaded blue. When you select a region it appears green. The areas shaded grey are not available on the current CD. Currently selected maps are displayed here.
INSTALL ADOBE READER button. The User Manual or Quick Start Guide can then be read. 5-6 Visit Navman for Updates Click on this option to visit the Navman website for updates, support and general information. Note: you will need an internet connection to use this option.
SmartS Professional supports a number of other types of GPS receivers, including the Navman Bluetooth GPS Receiver (shown here). To connect your handheld to a Bluetooth or serial GPS receiver, and for information on installing the GPS receiver into a vehicle, please refer to the instructions supplied with the GPS receiver.
Page 18
Navman SmartS™ Professional for Palm OS ® For your safety, a Restraint of Operation is automatically enforced when the handheld is connected to the Car Sony Users: Cradle. The Restraint of Operation means that a number of menu items and functions are made unavailable to the Restricted Function.
Navman SmartS™ Professional for Palm OS ® Getting Started 7-1 Starting SmartST Professional In the Launcher screen, tap on SmartST. When SmartS Professional fi rst starts, a short tutorial is available to show you how to use SmartS Professional. Tap anywhere on the screen to move to the next screen.
7-3 Confi guring the GPS Receiver Sony Car Cradle Users: Restricted You only need to confi gure your GPS receiver if you are using a Bluetooth or serial GPS receiver: The Sony Car Cradle Function. Refer is confi gured automatically.
From the drop down list, select GPS. • From the Port options, select SERIAL. • Refer to the instructions supplied with your GPS Receiver to select the Baud Rate. 7-4 Switching On the GPS Receiver All GPS Receivers must be switched on via the SmartS Professional software.
7-5 Obtaining a GPS Fix Tip: In order to Your handheld receives GPS signals through the GPS Receiver. In order for the receiver to receive signals: attain good GPS Your handheld must be outside or in a vehicle parked outside – sunlight alone is not suffi cient (e.g. through the performance, signals window of a building).
Navman SmartS™ Professional for Palm OS ® Controls 8-1 Touch Screen Note: To "tap and SmartS Professional is easy to use. Most of the time, you can tap on menu options and other on-screen buttons. The hold", press the stylus tap and hold function can be activated by pressing on a street map and holding to bring up a pop-up menu.
Navman SmartS™ Professional for Palm OS ® 8-4 Address Entry Icons Tip: The icon is displayed on all When entering a destination address, a number of icons are displayed screens and maps along the bottom of the address entry screen. The following list describes - tap this icon at any the function of each icon.
Navman SmartS™ Professional for Palm OS ® Setting Your Destination Before you travel, you must fi rst select a destination and allow SmartS Professional to plan your route. There are three main ways that you can program your destination: •...
Navman SmartS™ Professional for Palm OS ® 9-2 Navigating to an Address Sony Car Cradle Users: Restricted To enter a street address as your destination: Function. Refer From the MAIN MENU select DESTINATION, then ADDRESS. The Destination Address screen is displayed.
Page 27
Navman SmartS™ Professional for Palm OS ® Once the address is selected, choose from one of the following: Tip: If any of the • destination fi elds are not presented in capital display the current street on the Navigation Map Screen. The letters, then a valid map will show the Waiting for GPS icon until a fi...
Navman SmartS™ Professional for Palm OS ® 9-3 Navigating to an Intersection Sony Car Cradle Users: Restricted To enter the intersection of two streets as your destination: Function. Refer From the MAIN MENU, select DESTINATION, then INTERSECTION.The Destination Intersection screen is Section 6-1.
Page 29
Navman SmartS™ Professional for Palm OS ® Once the intersection is selected, choose from one of the following: • display the current street on the Navigation Map Screen. The map will show the Waiting for GPS icon until a fi x is found.
Navman SmartS™ Professional for Palm OS ® 9-4 Navigating to Points of Interest Sony Car Cradle Users: Restricted The map information that you are using also has a large number of “Points of Interest”, or POIs stored for your Function. Refer convenience.
Page 31
Navman SmartS™ Professional for Palm OS ® Select a POI from the list. Alternatively, if you know the name of the POI you are interested in, enter the fi rst few letters of the POI to narrow down the list.
Navman SmartS™ Professional for Palm OS ® 9-5 Navigating to a Favorite SmartS Professional allows you to store Favorite destinations, to save you from re-entering the location again. Use Quick Navs for your 3 most regular locations, and store other commonly used locations as Favorites.
Navman SmartS™ Professional for Palm OS ® 9-6 Navigating to a Recent Destination Destinations that you have recently used are stored inside your Handheld so that you can quickly access them. From the MAIN MENU, tap DESTINATION, then RECENT. (Recent destinations can also be selected by tapping MAIN MENU, then QUICK NAVS then RECENT).
Navman SmartS™ Professional for Palm OS ® 9-7 Using the Pop-Up Menu to Plan a Route You may prefer to program your destination directly from the Map Screen. Generally you will use this option if you know the area in which your destination is, or if you have selected allow you to scroll around a map and pick a point on the map.
Navman SmartS™ Professional for Palm OS ® 9-8 Route Planning Without a GPS Fix Routes can also be planned without a GPS fi x from the pop-up menu. Select a departure location by tapping and holding on a street/road on the Map Screen and then selecting "Set as Departure"...
Navman SmartS™ Professional for Palm OS ® Viewing Your Route Once you have selected your destination and SmartS Professional has calculated your route, there are four different ways that you can view instructions for your route. Cycle through the following three views by tapping on the Each view is described below.
Navman SmartS™ Professional for Palm OS ® 10-1 Map View The Map view is always oriented to the North, and shows your current position and surrounding street names. If you have already programmed a route, the route and all turns are highlighted. You can use the Map view to quickly set your departure point, and navigate to any destination.
Navman SmartS™ Professional for Palm OS ® 10-2 Navigation View The Navigation view is displayed when you calculate a route, except that the map is always oriented in the direction in which your vehicle is travelling. This is often an easier way to keep your bearings.
Navman SmartS™ Professional for Palm OS ® 10-3 3D Navigation Screen Similar to the Map Screen, the 3D (three dimensional) Navigation screen is displayed when you calculate a Note: to view this route, except that the map is always oriented to the direction in which your vehicle is travelling. This is often screen, a route must be calculated.
Navman SmartS™ Professional for Palm OS ® 10-4 Next Instruction View This view shows the information that you need for the next turn, the direction of the turn and the distance to the turn. Note: to use this view, a route must be To view the route, tap on the calculated.
Navman SmartS™ Professional for Palm OS ® 10-5 Instruction List The Instruction List displays the list of the remaining turns to your destination with the direction of the turn, the next Note: to view this screen, a route must street name and the distance to the turn. The very next turn is highlighted.
Navman SmartS™ Professional for Palm OS ® 10-6 Back-On-Track™ Feature Tip: This function can be disabled in the SmartS Professional is designed to re-plan your route automatically if you take a wrong turn. A ? symbol will display SETUP Menu.
Navman SmartS™ Professional for Palm OS ® Editing, Deleting and using Favorites and Quick Navs Tip: Convert recent SmartS Professional allows you to save destinations as Favorites, so you can access them quickly without re-entering destinations to address information. You can also use Quick Navs to save the three most commonly used Favorites, as Quick Navs can Favorites by selecting be accessed with less keystrokes than Favorites.
Page 44
Navman SmartS™ Professional for Palm OS ® 11-2 Editing or Deleting a Saved Favorite Sony Car Cradle Users: Restricted Follow these instructions to delete Favorites, personalise them with a nickname, or change them to Quick Navs. Function. Refer Section 6-1.
Page 45
Navman SmartS™ Professional for Palm OS ® Example: you may To make any of these changes, tap want to save your own address as a Quick • To change the name of your Favorite or Quick Nav, type it into the Name fi eld.
Navman SmartS™ Professional for Palm OS ® 11-3 Quick Navs Three of your most frequently used destinations can be stored to save time. Once saved, your Quick Navs can be accessed quickly through the Quick Nav menu with the minimum of key presses and without having to re-enter any information.
Navman SmartS™ Professional for Palm OS ® Using the GPS Status Information 12-1 GPS Reception The GPS Status Screen tells you how well you are receiving the GPS satellite information. SmartST Professional relies on the reception of signals transmitted by the Global Positioning System satellites orbiting the earth. This display shows a visual representation of the number of satellites that your handheld is receiving information from.
Page 48
Navman SmartS™ Professional for Palm OS ® Latitude and longitude are displayed along with a North-pointing compass, the heading in degrees and ground speed. Tip: In practice less than 12 satellites The 12 satellites that could be viewed from your current position are shown as segments. The satellites are represented...
Page 49
12-2 GPS Status Messages The GPS status messages are displayed on the three navigation screens (Map screen, Navigation screen, and the Next Instruction screen). The messages listed in the table below provide you with feedback on the status of the GPS receiver connection.
About settings: Display the version number of the SmartS Professional software you are running. programmed with default settings, which • GPS settings: Confi gure the communications settings for your GPS Receiver. can be adjusted to suit • Display settings: Change the map colors, select fast map panning or enable/disable the startup tutorial.
Refer to Section 7-3 Confi guring the GPS Receiver. Section 6-1. If you are experiencing diffi culty with your GPS receiver, you may be asked by Technical Support Staff to switch on the GPS Logging option: From the MAIN MENU, select SETUP.
Navman SmartS™ Professional for Palm OS ® This feature will speed up map panning when viewing or planning a route across a large or high density map area. With normal panning mode, the map is updated repeatedly as you drag the stylus across the screen. With fast map panning, a line is drawn from when you start to drag the stylus to the end position - only then is the map redrawn.
Navman SmartS™ Professional for Palm OS ® 13-5 Map Settings Sony Car Cradle Users: Restricted This screen shows all the map regions that have been installed in the Function. Refer memory cards. Section 6-1. From the MAIN MENU, select SETUP.
Navman SmartS™ Professional for Palm OS ® 13-7 Routing Settings Sony Car Cradle Users: Restricted There are a number of options that affect the way that SmartS Professional Function. Refer plans your route. You may be conscious of time and therefore want to get Section 6-1.
Navman SmartS™ Professional for Palm OS ® Accessories 14-1 Memory Cards Maps must be stored on memory cards. Please refer to your handheld documentation for suitable memory card options and installation instructions. 14-2 Memory Card Writers The memory card writer connects to your computer via a USB port, and is used in conjunction with the SmartS Professional Desktop application to download maps to a memory card.
® As long as the GPS receiver has a clear view of the sky, it will work accurately anywhere on earth. Note: in order for the GPS position to be displayed on a map, the relevant map will need to be installed on the memory card.
End User License and Warranty Agreement IMPORTANT - Please read carefully NAVMAN (THE LICENSOR) IS WILLING TO LICENSE THE SMARTS™ PROFESSIONAL SOFTWARE (THE SOFTWARE) TO YOU (THE CUSTOMER) ONLY IF YOU ACCEPT ALL THE TERMS OF THIS LICENCE. PLEASE READ THE TERMS CAREFULLY, BECAUSE USING THIS SOFTWARE WILL BE DEEMED TO BE YOUR ACCEPTANCE THAT YOU ARE USING IT ON THE FOLLOWING TERMS.
Page 58
You will be solely responsible for all shipping charges, freight, insurance and proper packaging to prevent breakage in transit. Navman will, at its discretion, repair or replace any defective product or its components at no cost to You for parts and labour. The replacement product or component takes on the warranty status of the original product or component.
® 16-2 FCC Statement Applicable to all Navman GPS Receivers. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation.