Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
•
WARNING: To prevent re or shock hazard, do not expose this product
to rain or moisture.
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
•
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prongs are provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
•
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
•
Only use attachments/accessories speci ed by the manufacturer.
•
Use only with the cart, stand, tripod, bracket, or table speci ed by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
•
Unplug this apparatus during lightning storms or when unused for long
periods of time.
•
Refer all servicing to quali ed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
•
To reduce the risk of electric shock, DO NOT remove cover or back
panel. No user serviceable parts inside. Refer servicing to
quali ed personnel.
2
IMPORTANT SAFETY INSTRUCTIONS
•
To help prevent electric shock, plug the power cable into properly
grounded sources. Use only properly grounded extension cords and
adaptors, if they are needed.
•
The AC main plug is used as the disconnect device, the disconnect
device shall remain readily operable.
•
Make sure nothing is lying on any of the cables.
•
Be sure the cables are located where they will not be stepped on or
tripped over.
•
Do not spill food or liquids onto the unit.
•
Do not push any objects into the free slots. Doing so will damage
the unit, can cause re or electrical shock, and can short out interior
components.
•
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampli ers) that produce heat.
•
Do not block cooling vents.
•
Do not place the equipment in a closed-in wall unit.
•
When you disconnect a cable, pull on its connector or on its strain
relief loop, not on the cable itself. Some cables have a connector with
locking tabs; if you are disconnecting this type of cable, press in on the
locking tabs before disconnecting the cables.
•
When you connect a cable, make sure both connectors are correctly
oriented and aligned before connecting to avoid bending connector pins.
•
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
•
Changes or Modi cations not expressly approved by the party
responsible could void the user's authority to operate this device.
3
Advertisement
Table of Contents
