Olympus TG-830 Instruction Manual page 42

2 Select the new landmark to be recorded on the
image using FG, and press the A button.
3 Select [OK] using FG, and press the A button.
Rotating images q
Rotating images
Submenu 1
Edit
1 Use HI to select an image.
2 Press the A button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make
settings for other images, and press the 
button.
● The new picture orientations will be saved even
after the power is turned off.
Capturing still images from movies Capturing still images from movies
q [In-Movie Image Capture] q
[In-Movie Image Capture]
Submenu 1
Edit
1 Use HI to select the movie and press the A
button.
2 Use HI to display the frame to be captured and
press the A button.
● The selected frame is recorded as a still
image.
42 EN
q [ [y y ] ]
Submenu 2
y
Submenu 2
In-Movie Image Capture
Trimming long movies Trimming long movies
q [Movie Triming] q
[Movie Triming]
Submenu 1
Edit
1 Use HI to select the movie and press the A
button.
Submenu 3
Records the trimmed movie as
New File
new movie fi le.
Overwrites the original movie with
Overwrite
the trimmed movie.
2 Use HI to display the frame to start erasing, and
then press the A button.
3 Use HI to display the frame to end erasing, and
then press the A button.
4 Use FG to select [Erase] and press the A
button.
● To cancel trimming, select [Cancel].
● Movie trimming is processed by seconds. The
movie length is automatically adjusted so that the
selected start and end frames are included.
When editing movies in a group When editing movies in a group
1 Expand the desired group.
"Playing back grouped images" (p. 22)
2 Use HI to select the movie and press the A
button.
● When you expand the group to edit respective
movie, the edited movie can be saved
respectively as [New File].
Submenu 2
Movie Triming
Application