Using The Touch Panel - Olympus SH-50 Instruction Manual

Learning how to use the
camera
● Press the n button to turn on the camera and
enter the standby mode. (Press the n button
again to turn off the camera.)
● Select the shooting mode, and press the shutter
button to shoot a still image.
● To shoot a movie, press the F button.
● Set the shooting functions using the function
menu or the setup menu.
● To view images, press the q button to switch to
playback mode.
● To return to standby mode, press the q button
again, or press the shutter button halfway down
and then release it.
● Press and hold the q button while the camera is
turned off to start up the camera in the playback
mode.
● In this case, pressing the q button again sets
the camera to the standby mode.
8 EN

Using the Touch Panel

Use the touch panel by touching the screen with
your fi nger.
● The touch panel can be used for operations
marked with  in this manual.
● Using a screen protector or gloves may cause poor
operability.
● Use a stylus pen (supplied) when it is diffi cult to
operate with your fi nger.
Using for the live guide (p. 15) Using for the live guide (p. 15)
In M mode, the live guide can be set.
1
Touch M.
● Touch an item to set the level.
2
Drag the level bar slider vertically
to set the level, and touch
● Touch O to end the live guide.
.
N
Clear & Vivid
Flat & Muted