Element ELEFT193 Instruction Manual page 25

TROUBLESHOOTING
Before contacting the service technician, perform the following simple checks. If
any problem still persists, unplug the LED TV and call for assistance.
PROBLEM
No sound and picture
Red LED indicator lights
Normal picture but no sound
The remote control does not
work
Power suddenly turns off
Picture appears slowly after
switching on
Poor color or picture
Horizontal/vertical bars or
picture shaking
Blue screen
Poor reception on
some channels
Lines or streaks in pictures
No output from one of the
speakers
POSSIBLE SOLUTIONS
• Check that the main plug has been connected to a
wall outlet.
• Check that you have pressed the POWER on the
front of the TV set.
• Check the picture contrast and the brightness
setting.
• Set in standby mode. Press either the Power button
or the Standby button on the remote control.
• Check the volume.
• Sound muted? Press the MUTE button.
• Try another channel, the problem may be with the
broadcast.
• Are the audio cables installed properly?
• Check to see if there are any objects between the
TV and remote control causing obstruction.
• Are batteries installed with correct polarity (+/-)?
• Correct remote operating mode set: TV, VCR, etc?
• Install new batteries.
• Is the sleep timer set?
• Check the power connection, power may be
interrupted.
• No broadcast on the station tuned.
• This is normal, the image is muted during the product
start up process. Please contact a service provider if
the picture has not appeared after 5 minutes.
• Adjust the color in Menu option.
• Keep a sufficient distance between the product and
the VCR.
• Try another channel, the problem may be with the
broadcast.
• Are the VIDEO cables installed properly?
• Activate any function to restore the brightness of the
picture.
• Check for local interference, such as an electrical
appliance or power tool.
• Press the SOURCE button to select correct source.
• Station or cable experiencing problems. Tune to
another station.
• Station signal is weak, reorient antenna for better
reception.
• Ckeck for sources of possible interference.
• Check the antenna (change the direction of the
antenna).
• Adjust balance in the Menu option.
23